The MetaMizer Vacuum System

The MetaMizer 240SSS includes a vacuum system: prior to sterilisation a vacuum is pulled on the pressure vessel, lowering the inlet chamber pressure. This is to aid in the transfer of heat from the steam to the waste.

Then, at the end of the sterilisation cycle, at pressure vessel blow-down another vacuum is pulled to remove as much moisture from the waste as possible. This process increases the cycle time, but results in drier waste.

The inner workings of the MetaMizer 240SSS

Our recent improvements have enabled these vacuum cycles to be optional. Without these vacuum cycles, the sterilisation process is quicker, but results in the output waste being slightly moister.

This setting can be changed by MetaMizer Service Technicians, enabling greater flexibility and control over the process for our MetaMizer customers.

13 views0 comments

Recent Posts

See All
  • LinkedIn - Grey Circle
  • Instagram


Ph: +612 9644 7444

Fax: +612 9645 1665

Address: 4-6 Raglan Rd, Auburn NSW, Australia 2144.